Bitaxe Robot Bitcoin Display Full guide

Basic setup ROBOT v2.12.0

Get your Robot online.

You only need a browser and the two WiFi passwords. Setup is four steps.

Start setup

Required

Connect to WiFi

The Robot uses 2.4 GHz WiFi. A dual-band network is fine if it includes 2.4 GHz.

  1. 1

    Turn on the Robot

    Confirm that the screen shows ROBOT v2.12.0.

  2. 2

    Join BitaxeRobot

    Open WiFi settings on your phone or computer. Join BitaxeRobot using the BitaxeRobot WiFi password on the private card.

    If asked, stay connected or use the network without internet.

  3. 3

    Open the setup page

    It normally opens automatically. If it does not, open a browser and enter:

    192.168.4.1
  4. 4

    Choose your local WiFi

    Select the network, enter its password, and tap Connect to WiFi.

    WIFI SAVEDSetup is complete.

After WIFI SAVED

You can stop here.

RobotSettings appears next, but it is optional. If you leave it alone, the normal display starts automatically.

Customize my Robot